All articles

How to Add a Driver to Your Trucking Authority

November 16, 20265 min read

You landed a steady shipper, or you're tired of turning down freight because you're at capacity. Either way, you need a driver — and that means working through FMCSA's driver qualification requirements before that person gets behind the wheel under your authority.

This isn't complex, but it has real consequences if you skip steps. An unqualified driver operating under your MC number is your liability.

What "Under Your Authority" Means

When you bring on a driver under your trucking authority, they operate using your MC number. Every load they haul, every roadside inspection they go through, and every violation they accumulate is attributed to your USDOT number via the FMCSA's CSA scoring system.

That's different from leasing on with a carrier — in that model, the carrier's authority covers the driver. Here, your authority is the umbrella, and protecting it means making sure every driver you add is fully qualified before they move freight.

Step 1: Verify CDL, Medical Certificate, and MVR

Before anything else, confirm the basics.

Valid CDL: The driver must hold a current commercial driver's license in the appropriate class for the vehicle. Verify it yourself — don't take a copy of an ID without confirming it's current and not suspended. State DMV motor vehicle record (MVR) requests are the standard method.

Current Medical Certificate: CDL drivers must carry a valid DOT physical medical certificate. The exam must be performed by a certified medical examiner on FMCSA's National Registry of Certified Medical Examiners. Medical certificates are valid for up to 24 months, but conditions that require more frequent monitoring result in shorter validity periods. Check the expiration.

Motor Vehicle Record: Pull an MVR for the driver from every state they've held a license in during the past 3 years. FMCSA regulations (49 CFR 391.23) require this before the driver operates a CMV, and annually thereafter.

Step 2: Query the Drug and Alcohol Clearinghouse

This is mandatory and cannot be skipped. Before a driver operates any CMV under your authority, you must conduct a pre-employment query of the FMCSA Drug and Alcohol Clearinghouse.

The Clearinghouse is a federal database that records drug and alcohol violations by CDL holders. A pre-employment query tells you whether the driver has an unresolved violation that prohibits them from operating a CMV.

If the query returns a "prohibited" result, you cannot use that driver until they've completed the return-to-duty process with a Substance Abuse Professional. Hiring a driver with an open Clearinghouse violation is a serious compliance failure that can result in substantial penalties.

You register as an employer at clearinghouse.fmcsa.dot.gov. There's a small per-query fee.

Step 3: Pre-Employment Drug Test

After the Clearinghouse query, a pre-employment drug test is required before the driver operates a CMV. The test must be a DOT-compliant urine test conducted through a certified laboratory and reviewed by a Medical Review Officer (MRO).

The driver cannot drive under your authority until you receive a negative result. Keep the results in the driver's qualification file. Running a fresh pre-employment test for every new hire is the safest approach regardless of any prior employer records.

Step 4: Build the Driver Qualification File

FMCSA regulations (49 CFR 391.51) require you to maintain a driver qualification file for each driver. The file must contain:

  • Employment application
  • Motor vehicle records for the past 3 years
  • Road test certificate or equivalent
  • Previous employer inquiries for the past 3 years (required within the first year)
  • Pre-employment drug test result
  • Current medical certificate (copy)
  • Clearinghouse query results

Keep qualification files for at least 3 years after the driver leaves. Some records (such as accident records) have longer retention requirements.

You can maintain these files on paper or electronically, as long as they're accessible for a DOT audit. Building a system to track document expiration dates — especially CDL and medical certificate renewals — prevents gaps in compliance down the road.

Compliance tracking that logs driver documents and sends alerts when certifications are approaching expiration keeps qualification files current without manual monitoring of every renewal date.

Step 5: Notify Your Insurance Carrier

Adding a driver changes your risk profile. Notify your insurance carrier before the driver operates under your authority. Most commercial trucking policies require you to report new drivers, and operating an unlisted driver can affect your coverage in the event of a claim.

The insurer will typically run their own MVR check and may adjust your premium. A driver with a poor driving record can significantly increase your policy cost. Knowing this before you hire — not after a claim — is worth the conversation.

Step 6: Set Up the Driver in Your ELD System

If your operation requires ELDs, your new driver needs to be enrolled in your ELD system before they begin driving. This means creating their driver account, assigning credentials, and verifying the device recognizes their CDL information.

Fleet management that integrates with ELD providers like Motive or Samsara ties the driver's records directly to your compliance profile from day one. Set up their account correctly — a driver running under incorrect credentials creates log discrepancies that show up on inspections.

Step 7: Annual Reviews

Adding a driver isn't a one-time event. FMCSA requires annual:

  • MVR review for each driver
  • Driver's annual certification of violations (the driver certifies any violations in the past 12 months in writing)
  • Review of driving record

Build calendar reminders or use a compliance alert system to flag when each driver's annual review comes due. Missing an annual review is a citable violation during a DOT audit and an easy one to avoid with a system in place.

The Bigger Picture: Your Safety Score

Every driver you add affects your CSA scores. Their inspections, violations, and crashes are attributed to your USDOT number. Before adding a driver, it's worth looking not just at their CDL status and drug test, but at their actual roadside inspection history if you can access it through FMCSA's Safety Measurement System.

The CSA score breakdown covers how violations accumulate under your authority and what gets carriers flagged for compliance audits. Adding a driver with a history of HOS violations or inspection failures isn't just a paperwork risk — it's a business risk that can affect your insurance rates and shipper relationships.

Managing Multiple Drivers Over Time

As you grow from one driver to two or three, managing qualification files, document expiration tracking, and annual review schedules manually gets complicated. Knowing which drivers have medical certificates expiring next month, which need their annual MVR pulled, and which are due for a Clearinghouse annual query requires a system — not just a folder.

Fleet tracking that organizes driver records alongside load history gives you a single place to manage the operational side of running drivers under your authority.


Truck Command supports driver management and compliance tracking for owner-operators and small fleets adding drivers. Plans start at $20/month with a 14-day free trial — no credit card required.

Stop running your trucking business on paper

Loads, invoicing, expenses, IFTA, and compliance in one place — built for owner-operators, starting at $20/month.

Start your 14-day free trial

No credit card required