All articles

How to Get Oversize Load Permits

November 16, 20267 min read

Oversize and overweight loads move every day on US highways — wind turbine blades, industrial transformers, construction equipment, prefabricated sections. They move legally because the carriers understand how the permit system works.

If you're new to OS/OW freight or expanding into it, the process is manageable once you know what triggers it and how each state handles it.

What "Oversize" Actually Means

A load is oversize when it exceeds the standard legal dimensions or weight limits that allow it to travel without a permit. While states set their own specific rules, the general thresholds that most states use as a baseline are:

DimensionStandard Legal Limit
Width8 feet 6 inches
Height13 feet 6 inches
Length (single vehicle)Varies by state, commonly 48–53 feet
Gross vehicle weight80,000 lbs

Exceeding any one of these thresholds typically requires a permit. Loads that exceed multiple thresholds — or exceed them significantly — may require more complex permitting and in some states are classified as "superloads" with separate requirements.

Different states use different terminology: oversize load, overdimensional (OD), oversized/overweight (OS/OW). The concept is the same — you're operating outside legal limits and need written authorization from each state you travel through.

There Is No National Oversize Permit

This is the most important thing to understand: each state issues its own permits, and each state you travel through must issue a separate permit for that segment of the route.

A load moving from Texas to Ohio through Arkansas, Tennessee, and Kentucky requires a valid permit from all five states. Applying for and receiving all five before the load moves is your responsibility as the carrier.

Some states participate in multi-state permitting portals that simplify the process (more on this below), but the fundamental structure is state-by-state.

Annual Permits vs. Per-Trip Permits

Annual blanket permits cover multiple trips over a 12-month period for loads within defined dimension ranges — typically loads that exceed legal limits only marginally. These are cost-effective for carriers who regularly haul the same type of freight on consistent routes. You pay a flat annual fee and can move qualifying loads without filing a new permit each time.

Per-trip permits are issued for a specific load, on a specific route, within a specific time window. Most oversize loads require per-trip permits. Each permit specifies:

  • Origin and destination
  • Route (sometimes down to specific roads and interchanges)
  • Permitted dimensions and weight
  • Authorized travel dates and times
  • Escort requirements, if any

Travel Restrictions

Most oversize permits come with restrictions. Read them before you plan your movement — restrictions can significantly affect your timeline:

Daylight-only travel: Many states require oversize loads to travel only during daylight hours. Combined with daily drive-time limits, this affects how many miles you can cover per day.

Weekday-only restrictions: Some states prohibit oversize load movement on Saturdays, Sundays, or both.

Holiday blackouts: A number of states prohibit oversize load movement during holiday travel periods — Memorial Day, July 4th, Labor Day, Thanksgiving weekends. If your permit window overlaps with a blackout, you can't move. Plan your permit dates accordingly.

Time-of-day windows in metro areas: Many major metropolitan areas restrict oversize loads during peak traffic hours regardless of daylight rules.

Weather restrictions: Wide or high-profile loads may be restricted during high-wind warnings. Loads like wind turbine blades or large panels are especially susceptible to this.

Escort Requirements

Pilot/escort vehicle requirements are determined by load dimensions and vary by state. As a general principle:

  • Wide loads exceeding certain thresholds (commonly 12–14 feet wide, though it varies) require at least one pilot car
  • Long or wide loads may require both a front and rear escort
  • Extreme-dimension superloads may require front car, rear car, and utility company escorts for overhead line crossings

An escort vehicle that travels in front of the load — often called a "lead car" or "pole car" — clears traffic and warns of approaching obstacles. A rear escort manages traffic behind the load.

Escort drivers must be certified in the states where they operate in many jurisdictions. If the load is traveling across multiple states with different escort requirements, you'll need to verify certification in each state.

Utility company notifications — required when a tall load travels under power lines — add another coordination layer. The permit itself typically identifies where these notifications are needed.

The shipper or broker arranging an OS/OW load often coordinates escort logistics, but as the carrier you need to confirm what's required before you agree to move the load. These costs need to be in your rate.

Required Markings and Equipment

Operating an oversize load requires specific equipment on the truck and trailer:

  • "OVERSIZE LOAD" banner: Required on the front of the truck and often on the rear of the load. States specify minimum banner dimensions.
  • Amber warning lights: Rotating or strobe amber lights on the cab or trailer.
  • Red or orange flags: Placed at the outer corners of the load.

Using undersized signs or missing required lighting is itself a violation — inspectors check this.

How to Apply for a Permit

Each state has a permitting portal. Many states use the AASHTO OSOW Single Permit Portal (at permitportal.aashto.org), which allows you to file permit applications across multiple member states from one interface. This significantly reduces the administrative burden for multi-state moves.

For states not on the AASHTO portal, you apply directly through the state DOT's permitting office. Most have online systems; a few still require phone or fax applications.

What you'll need to apply:

  • Registered vehicle information (plate number, make, weight ratings)
  • Load dimensions: width, height, length, and weight per axle
  • Origin and destination addresses
  • Proposed route
  • Requested travel dates

For superloads or routes with complex clearances, some states require a route survey — a vehicle that pre-runs the route to confirm bridge clearances and overhead obstructions — before the permit is issued. This adds time and cost.

Permit Fees

Permit fees vary significantly by state and load type. A per-trip permit for a marginally oversize load might cost a modest fee in one state and considerably more in another. Superload permits for extreme or very heavy equipment can run into several hundred dollars or more per state depending on the dimensions and weight.

Build permit costs into your rate when quoting OS/OW freight. Carriers who don't account for permit fees, escort costs, and slower travel speeds lose money on oversize loads.

Tracking OS/OW Load Costs

If you're hauling oversize freight regularly, the administrative and cost complexity adds up quickly. Permit fees across multiple states, escort costs, special equipment, and the time cost of slower travel all affect what a load actually nets.

Expense tracking that records permit fees, escort costs, and other per-load expenses gives you an accurate picture of what OS/OW loads actually earn versus what they cost.

Load management that organizes permit documentation alongside the load record keeps everything accessible when a scale inspector or state officer asks for your permit. Having the right permit in hand at an inspection — not hunting through a stack of paperwork — saves you from complications at scale houses and roadside stops.

State mileage tracking that records which states each load crosses is directly relevant to permit coverage — your permits need to match your actual route.

A Note on Overweight vs. Oversize

Oversize (dimensional) permits and overweight permits are related but different. A load can be oversize without being overweight, or overweight without being oversize, or both. Each type has its own permit process and fee structure.

An overweight permit authorizes excess gross or axle weight. Some states issue combined OS/OW permits; others require separate applications. When you're applying, be clear on which dimensions and weights exceed legal limits — the permit needs to cover everything that's out of legal bounds for the route.

The Practical Reality

Oversize freight pays better than standard freight for a reason. The logistics complexity is real: permit applications across multiple states, escort coordination, travel restrictions, route planning, markings, and slower movement all require active management. Carriers who build that complexity into their rates and run a systematic permit process make money on OS/OW loads. Carriers who underestimate the administrative side often don't.


Truck Command supports load management, expense tracking, and dispatching for owner-operators and small carriers, including those hauling OS/OW freight. Plans start at $20/month with a 14-day free trial — no credit card required.

Stop running your trucking business on paper

Loads, invoicing, expenses, IFTA, and compliance in one place — built for owner-operators, starting at $20/month.

Start your 14-day free trial

No credit card required